|
World's Finest Mechanical Draft Systems and Kitchen Ventilation Products. |
Enervex Chimney Fans
Model RS Chimney Fan Selection
Wood and Gas Fired Fireplaces and Stoves |
QUICK SIZING.... STEP 1
Determine the type of opening, measure and calculate.....
 |
|
 |
|
 |
|
 |
|
 |
|
 |
| One-sided |
|
Two-sided (See-through) |
|
Corner |
|
Three-sided |
|
Free-standing |
|
Free-standing Round |
| A x B |
|
1.5 x A x B |
|
A x B |
|
( A + B ) x C |
|
1.5 x A x B |
|
1.185 x A2 |
QUICK SIZING....
STEP 2 |
Determine the type of flue and measure the INSIDE measurement... use the
chart below to convert square and rectangular to round. |
CONVERSION
OF Rectangular /
Square to Round Flues
|
 |
Measure the INSIDE ( side to side ) measurements of the clay liner.
Ex... The INSIDE measurement of 6 x 10"
on a clay liner is equivalent to
10 (dim.
A) - 6 (dim.
B) = 8 (8"
Flue Size)
NOTE: Clay liners are "called"
by their OUTSIDE measurements, the INSIDE measurements may vary
depending on the manufacturer and location.
EX. A 13x13 clay liner may
only have an INSIDE measurement of 10" x 10" |
QUICK SIZING....
STEP
3 |
Use of the following fan
selection tables below to calculate the Exhausto fan required to fully exhaust the
fireplace opening and flue system. |
 |
The "opening in square
inches" refers to the fireplace or appliances over-all face opening.
Example : In a small wood burning fireplace, if the hearth opening is
18" x 24" with an 8" round ( INSIDE MEASUREMENT ) clay liner in a brick and mortar chimney we
would...
Multiply the length and width, in this case 18" x 24" = 432 square
inches. Being less than 600, on the wood burning chart above, follow the column to the 8"
flue size. Highlighted in
orange, the chart shows an RS 9 to be the proper
size chimney fan for this application. |
The
RED background
indicates that the fan will most likely create some air-flow noise due to a high
air velocity in the chimney.
The BLUE
background indicates the fan base will not cover the chimney opening and a
special adapter must be used.
| |
Fireplaces (wood-fired) |
| |
Fireplace Opening in square inches |
| Flue
Size |
Max. 400 |
Max. 600 |
Max.
900 |
Max.
1200 |
Max.
1500 |
Max.
2000 |
Max.
2500 |
Max.
3300 |
| 5 |
RS 12 |
RS 16 |
* |
* |
* |
* |
* |
* |
| 6 |
RS 9 |
RS 12 |
RS 16 |
* |
* |
* |
* |
* |
| 7 |
RS 9 |
RS 9 |
RS 14 |
RS 16 |
* |
* |
* |
* |
|
8 |
RS 9 |
RS 9 |
RS 12 |
RS 14 |
RS 16 |
* |
* |
* |
| 9 |
RS 9 |
RS 9 |
RS 12 |
RS 14 |
RS 16 |
RS 16 |
* |
* |
| 10 |
RS 9 |
RS 9 |
RS 12 |
RS 12 |
RS 14 |
RS 16 |
* |
* |
| 12 |
RS 9 |
RS 9 |
RS 12 |
RS 12 |
RS 14 |
RS 14 |
RS 16 |
* |
| 14 |
RS 9 |
RS 9 |
RS 12 |
RS 12 |
RS 12 |
RS 12 |
RS 14 |
RS 16 |
| 16 |
RS 9 |
RS 9 |
RS 12 |
RS 12 |
RS 12 |
RS 12 |
RS 14 |
RS 16 |
| 18 |
RS 9 |
RS 9 |
RS 12 |
RS 12 |
RS 12 |
RS 12 |
RS 14 |
RS 16 |
| 20 |
RS 9 |
RS 9 |
RS 12 |
RS 12 |
RS 12 |
RS 12 |
RS 14 |
RS 16 |
| 22 |
RS 9 |
RS 9 |
RS 12 |
RS 12 |
RS 12 |
RS 12 |
RS 14 |
RS 16 |
| 24 |
RS 9 |
RS 9 |
RS 12 |
RS 12 |
RS 12 |
RS 12 |
RS 14 |
RS 16 |
If there are more than 2x90° elbows,
a bigger fan may be necessary.
Short Flue System?
The RSHT Chimney Fan is a high temperature exhaust fan that can handle 1000+
degrees at the termination. |
 |
Need help sizing? Need
help for fan selection?
800 685 8263
info@volko.com |
RSHT High Heat Fan
Wood / Gas Fireplaces |
|
RSHT 009 - 016 |
Gas fireplaces will need additional controls...
PDS (Proven Draft Switch) Safety control that senses
a draft. A pressure sensor that ties into the log set or appliance
controls and would shut the gas off if the draft became negative.
ADC100 - A pre/post purge control that would extend the
the fan cycle before and after gas is present for a fireplace or appliance.
Note: The
RED background
indicates that the fan will most likely create some air-flow noise due to a high
air velocity in the chimney.
The BLUE
background indicates the fan base will not cover the chimney opening and a
special adapter must be used.
| |
Fireplaces (gas-fired) |
| |
Fireplace Opening in square inches |
| Flue
Size |
Max. 400 |
Max. 600 |
Max. 1000 |
Max. 2000 |
Max. 2500 |
Max. 3000 |
Max. 3500 |
Max. 5000 |
| 5 |
RS 9 |
RS 12 |
* |
* |
* |
* |
* |
* |
|
6 |
RS 9 |
RS 9 |
RS 12 |
* |
* |
* |
* |
* |
|
7 |
RS 9 |
RS 9 |
RS 12 |
RS 14 |
RS 14 |
* |
* |
* |
|
8 |
RS 9 |
RS 9 |
RS 9 |
RS 12 |
RS 16 |
* |
* |
* |
| 9 |
RS 9 |
RS 9 |
RS 9 |
RS 12 |
RS 12 |
* |
* |
* |
|
10 |
RS 9 |
RS 9 |
RS 9 |
RS 12 |
RS 14 |
RS 16 |
RS 16 |
* |
|
12 |
RS 9 |
RS 9 |
RS 9 |
RS 12 |
RS 14 |
RS 14 |
RS 16 |
* |
|
14 |
RS 9 |
RS 9 |
RS 9 |
RS 12 |
RS 14 |
RS 14 |
RS 14 |
* |
|
16 |
RS 9 |
RS 9 |
RS 9 |
RS 12 |
RS 14 |
RS 14 |
RS 14 |
* |
|
18 |
RS 9 |
RS 9 |
RS 9 |
RS 12 |
RS 14 |
RS 14 |
RS 14 |
RS 16 |
|
20 |
RS 9 |
RS 9 |
RS 9 |
RS 12 |
RS 14 |
RS 14 |
RS 14 |
RS 16 |
|
22 |
RS 9 |
RS 9 |
RS 9 |
RS 12 |
RS 14 |
RS 14 |
RS 14 |
RS 16 |
| 24 |
RS 9 |
RS 9 |
RS 9 |
RS 12 |
RS 14 |
RS 14 |
RS 14 |
RS 16 |
If there are more than 2x90° elbows,
a bigger fan may be necessary.
Please call 800 685 8263
or email
us
(info@volko.com)
|
Wood stoves, coal stoves
and fireplace inserts
| |
Stoves |
Fireplace Inserts |
| |
Door Opening in square inches A x B |
| Flue
Size |
Max. 300 |
OVER 300 |
|
6 |
RS 9 |
RS 12 |
| 7 |
RS 9 |
RS 12 |
| 8 |
RS 9 |
RS 12 |
| 9 |
RS 9 |
RS 12 |
| 10 |
RS 9 |
RS 12 |
|
|
If there are more than 2x90° elbows,
a bigger fan may be necessary. |
|
Fan Specifications
800 685 8263 or email
us
(info@volko.com)
|
 |
 |
| Fan
Model |
Part
Number |
|
RS 009 |
101.0299.1200 |
|
RS 012
|
101.0499.1200 |
|
RS 014 |
101.0699.1200 |
|
RS 016 |
101.0899.1200 |
Capacitor
Wiring Diagram
1 Junction Box
2 Conduit/cord
3 Motor
4 Motor Housing
5 Cooling Plates
6 Bird Screen
7
Base Plate
8
Locking Nut
9
Inlet
10
Axial Vane
11
Hinges
12
Capacitor
( inside J-box ) |
RS Chimney Adaptors
will be necessary for any metal pipe installation.
 |
SCA - Steel Chimney Adapter
The ENERVEX Steel Chimney Adapter is used when installing the RS chimney
fan on the top of a single, double or triple wall steel chimney. The
adapter is designed to slide into the steel chimney for a tight fit. The
outer diameter of the collar is 1/8” smaller than the inner diameter of
the steel chimney, and has a 5” deep collar.
SCA Adaptor
Product Info PDF |
 |
ASCA - Air-cooled Steel Chimney Adapter
The ENERVEX Air-Cooled Steel Chimney Adapters are used specifically when
installing a chimney fan on the top of a double-walled, air-cooled
chimney.
The adapter is designed to slide into the chimney for a tight fit. The
outer diameter of the collar is 1/8" smaller than the inner diameter of
the chimney. The 5" collar eliminates the need to secure the adapter
externally. ASCA Adaptor
Product Info PDF
|
Enervex?... but
my new fan says Exodraft.
Exhausto is now Exodraft, distributed as Enervex.
Read More...
Enervex Fans... draft solutions for kitchen and
pizza oven exhaust.
Please call 800 685 8263
or email
us
(info@volko.com) for
prices
 |
 |
 |
 |
 |
 |
Fan Controls
Draft Switches |
EcoDamper
System |
Downloadable PDF's
Product Literature |
Motors - Impellers
Capacitors |
Maintenance from
Oven Deck to Fan |
Enervex Fan Source |
|
CONTROLS |
MFD - FDDS |
LIBRARY |
PARTS |
FAN FAIL |
HOME |
| 
